A combustible liquid, it is a distillate of petroleum and has a mild odor similar to kerosene. * Mineral spirits is a clear water white solvent sold in hardware and paint stores, often as paint thinner for oil-based paints. If odor is a problem, wash out the mineral spirits with soapy water or a dilute solution of Woolite or a mild dishwashing liquid. If necessary, lightly scrape the last of the White-Out from the valleys of the leather grain with fingernails. In the final cleaning, use a new, clean cloth to avoid re-transferring the White-Out.Several cleanings may be necessary to remove all of the White Out and to avoid a hazy or chalky appearance on the NYTEK® surface once the solvent has evaporated. Blot it up quickly with a clean, dry soft cloth to avoid spreading.The White Out will fade as it begins to dissolve. Dip a soft toothbrush into mineral spirits,* shake off the excess, and brush the remainder of the stain in a circular motion.Work with a small area or one spot at a time.Repeat three or four times until White Out no longer transfers to the tape.
Push the tape down into the grain with the wooden handle of a kitchen utensil. Rub masking tape on the dried spot, pulling it off quickly. If the White Out is still wet, blot it with a cloth, sponge or paper towel. Wite-Out®, Liquid Paper® or Similar Correction FluidsĬorrection fluids will dry in one to two minutes, so quick action is necessary.
0 kommentar(er)
